Farmhouse Style
Queen Headboard Plans!

Country Casual Queen Headboard Plans for the Beginner Woodworker!

These Farmhouse queen headboard plans are another winner from the Kreg Tool Company collection of FREE Kreg Jig plans!

The queen-sized headboard stands 60" tall.  With the top overhang, it is 68" wide.  It will be the center point for a beautiful country bedroom.

This headboard can be build by a beginner woodworker!  There are a couple of miter cuts for the center braces, but the plans are very clear how to make them.  See more in our review below.

This plan was added to the Kreg Tool Company collection of FREE pocket hole plans in February, 2015.  It is a wonderful addition!

(Photo courtesy of Kreg Tool Company, and is subject to copyright protection.)

The link to download
this free wood working plan
from Kreg Tool Company
is at the bottom of this page.

We Have Built Many of the Free Projects from the Kreg Tool Company.

Click on this link or the photo to visit the page that shows the projects we have already built.  Those projects include this Kreg jig workbench, a bird feeder, a student desk, wall cabinets, Kreg jig toy box, and an end table/bookshelf.

Woodworking Tools Needed to Build These Queen Headboard Plans.

You will need the following woodworking hand tools for these free Kreg Tool Company plans:

To make the cuts as straight as possible, the plan also recommends that you use the Kreg Rip-Cut and the Kreg Square-Cut.

The woodworking power tools you need for this pocket hole headboard are:

  • circular saw or jig saw;
  • miter saw;* and
  • drill.

*You will need to miter the ends of the cross braces.  The easiest way to do this is with a miter saw.  But these cuts could also be made with a circular saw or jig saw.  You would have to use a square to get the right angles, and your cuts would have to be very accurate!

As with every Kreg plan, we strongly encourage you to protect your eyes with safety glasses when using any power tools.

The Materials List for this Kreg Tool Company Plan.

Materials needed for these Farmhouse Style, Queen Headboard Plans:

  • (3) 96" long 2x6 pine;
  • (2) 96" long 2x4 pine;
  • (4) 96" long 1x4 pine;
  • (1) 4' by 8' sheet of 3/16" beadboard paneling;
  • (56) 1 1/4 inch coarse Kreg screws;
  • (8) 2 1/2 inch coarse Kreg screws;
  • (6) 1 1/4" wood screws; and
  • (40) 2/3" wood screws.

Project Costs to Build this Country Casual Headboard Plan.

If you were to build this plan of pine and the bead board as shown in the plan, the cost of the wood and hardware is approximately $100. 

You will have some of the bead board left over for smaller projects, like the Shaker wall shelf.

Our Hints, Tips and Recommendations.

THIS PLAN IS NOT DIFFICULT!  Each step of these plans, from purchasing the materials, to cutting the wood, to the right order of assembly, is laid out very clearly.   You may want to build something smaller to start, but a careful beginner woodworker could build these queen headboard plans!

The only part that takes this plan up one step are the miter cuts on the bracing.  A miter saw would make these cuts very easily, but if you don't have access to a miter saw, there are alternatives.  Once you have the interior frame assembled, you can lay the brace pieces in place, them draw the lines to cut.  Those cuts could then be CAREFULLY made with a circular saw or jig saw. This will make sense when you see the diagrams included in the plan.

So many beginner plans use primarily plywood - because it is usually easier to work with.  It is nice that these queen headboard plans use solid boards for all except the bead board back.

This plan uses edge joinery throughout.  A good face clamp is a must!   Check out the Kreg AutoMaxx to help you get all of the edges connected evenly.

Go to the Kreg Tool Company Website to Get a Copy of These Plans.

To go to the website for the plans for this headboard, click here, or on the Kreg Tools logo. Then click on the "Get Inspired" tab at the top of the page. Then go to "Plans."


Check Out the Ten Plans in the Kreg DIY Project Kit!

This farmhouse table plan is one of the ten plans in the Kreg DIY Project Kit.  If you buy the kit, you get all ten plans FREE.  If you only want one plan, you can buy it from Kreg Tool Company.

Click on this link, or on the photo, to see our review of these plans for the beginner woodworker.  HINT:  We think they are pretty good - actually, better than that.

Check Out the Pocket Hole Cabinet Plans on This Website.

Kreg Tool Company has a free wall cabinet plan.  Check out that plan, as well as some other pocket hole cabinet plans, by clicking on this link, or on the photo.

Return to Top of Page.

Recent Articles

  1. Repair Cracked Wood Chair Very Easily! You Can Do It!

    Mar 09, 16 11:04 AM

    Repair cracked wood chair instead of throwing it out! It is easy!

    Read More

  2. This DIY Hanger Rack is Incredibly Handy! Part of Laundry Room Makeover.

    Feb 16, 16 09:42 AM

    This DIY hanger rack is simple to make! Costs almost nothing. Need only a few tools.

    Read More

  3. Build a Ladder for Laundry Room! It's Easy! You can do it!

    Jan 29, 16 10:08 AM

    Yes! You can make this ladder for laundry room! Step by step instructions!

    Read More

Return to Top of Page.