Build Kitchen Cart with Plans from Kreg Tool Company!

You Can Build This Kitchen Cart!

Build Kitchen cart with just a few woodworking tools.  This plan is designed by the Kreg Tool Company for the beginner woodworker.

It is available for purchase on their website, or it is one of the 10 FREE plans when you purchase the Kreg DIY Project Kit.

(To learn more about the Kreg DIY Project Kit, click on the link above which takes you to Kreg Tool, or click here to see OUR review of this set for the woodworking beginner.)

Just like the Kreg tools, this is an excellent plan!  The plan is very detailed, with step-by-step diagrams.  It includes a complete materials list, cutting diagrams, and numerous tips.  Even though this cart has about 40 wood pieces, none of the cuts are complicated.  And the plan shows you how to assemble it section by section.  The assembly of each section is not difficult.

The link to purchase your own copy
of this build kitchen cart plan
  is at the bottom of the page.
It will take you to the Kreg Tool Company website.

Woodworking Tools Needed to Build This Kitchen Cart.

This woodworking plan from Kreg Tool Company requires the following woodworking HAND tools:

  • Kreg jig;
  • woodworking clamps;
  • hammer;
  • tape measure; and
  • pencil.

Always make sure you wear your safety glasses when using your saws or drills.

You will need the following woodworking POWER tools:

miter saw, circular saw and drill.

An electric sander would be easier than hand sanding, but it is not absolutely necessary.

Here is a List of the Materials for This Kreg Jig Plan.

Materials Needed To Build Kitchen Cart:

  • (1) 48" x 48" x 3/4" thick sheet of plywood;
  • (1) 24" x 48" x 3/4" thick sheet of plywood;
  • (1) 24" x 24" x 3/4" thick sheet of plywood;
  • (4) 36" long 2x2 boards;
  • (5) 96" long 1x3 boards;
  • (1) 72" long 1x3 board;
  • (2) 96" long 1x2 boards;
  • (1) 72" long 1x2 board;
  • (1) 48" long 1x2 board;
  • (6) 96" long pieces of 1/4" x 3/4" screen molding;
  • (160) 1 1/4 inch coarse Kreg screws;
  • (4) 1/4" shelf pins; and
  • (4 1 1/2" swiveling casters.

(You may not be able to find the screws at your local hardware or big box store.  By clicking on the photo of the screws, you can buy them directly from the Kreg Tool Company.)

To learn more about selecting your plywood, visit this page.

To learn more about selecting your pine boards, click here.

The Approximate Costs to Build Kitchen Cart are Below.


To build this Kreg plan from a sanded pine plywood, your costs would be approximately $130, not including the cost of your finishing materials.

When your kitchen cart is complete you will have counter space measuring 25" deep and 40 1/2" wide.  You will also have approximately 7 cubic feet of storage space.

Check Out
our Hints, Tips and Recommendations!

Pay close attention to the "Project Notes" included with this build kitchen cart plan!  They are VERY helpful!

When we first looked at this plan, we thought we would like to have more of the storage space enclosed.  This would be especially true if  you plan to move it from location to location often.

Another option would be to put a drawer in one or more of the slots.  A drawer or two could also be a later addition - after you have had more practice.  (If you would like to learn how to make drawers, visit our "How To Build Drawers" page.)

Another option would be to create a solid bottom shelf, but that could detract from the character of the piece.

OR, you could build it according to the plan!

However you decide to build it, the purchase price of $7 is well worth it.

Visit the Kreg Tool Company Website to Get Your Plans.

To go to the website for these plans, click here, on the Kreg Tools logo.  Then click on the "Products" tab at the top of the page, and then go to "Education and Apparel."  Your last click is on "Product Plans."  There you can see all of the plans you can purchase from Kreg Tool Company, including this kitchen cart plan.

After purchase, you will receive a download code via email. The email will direct you back to the Kreg Tool Company website, where you can enter your code to download the plan.

It's very simple!  We have done it a bunch of times!

More Kitchen Cart Plans!

Click on the photo, or on this link, to review more of kitchen carts you can build with your Kreg Jig.

Return to Top of Page.

Recent Articles

  1. Repair Cracked Wood Chair Very Easily! You Can Do It!

    Mar 09, 16 11:04 AM

    Repair cracked wood chair instead of throwing it out! It is easy!

    Read More

  2. This DIY Hanger Rack is Incredibly Handy! Part of Laundry Room Makeover.

    Feb 16, 16 09:42 AM

    This DIY hanger rack is simple to make! Costs almost nothing. Need only a few tools.

    Read More

  3. Build a Ladder for Laundry Room! It's Easy! You can do it!

    Jan 29, 16 10:08 AM

    Yes! You can make this ladder for laundry room! Step by step instructions!

    Read More

Return to Top of Page.