Build Decorative Wall Shelf with This Kreg Jig Plan.
You Can Build This Decorative Wall Shelf!
Build decorative wall shelf with this very simple plan from Kreg Tool Company. It only requires a few woodworking tools, and is a great plan for the
You can buy this plan from the Kreg Tool Company. It is also one of the 10 FREE plans you receive when you
purchase the Kreg DIY Project Kit.
(To learn more about the Kreg DIY Project Kit, you have two options:
1. Click on the link above which takes you to Kreg Tool; or
2. Click here to see OUR review of this set of tools for the woodworking beginner.)
The plan is very
detailed, with step-by-step, colorful diagrams. As with all the plans
produced by Kreg Tool Company, it includes a complete materials
list, cutting diagrams, and numerous tips.
This plan is very simple, and a great way for a novice woodworker to get started.
The link to purchase your own copy
of this build decorative wall shelf plan
is at the bottom of the page.
It will take you to the
Kreg Tool Company website.
Woodworking Tools Needed to Build This Decorative Wall Shelf.
This woodworking plan from Kreg Tool Company requires only a few tools. The woodworking HAND tools are:
- Kreg jig;
- woodworking clamps;
- tape measure; and
Always make sure you wear your safety glasses when using your saws or drills.
You will need the following woodworking POWER tools:
miter saw, circular saw and drill.
An electric sander would be easier than hand sanding, but it is not absolutely necessary.
Here is a List of the Materials for This Kreg Jig Plan.
Materials Needed To Build Decorative Wall Shelf:
- (1) 24" x 48" x 3/4" thick sheet of plywood;
- (1) 96" long 1/4" x 3/4" screen molding;
- (15) 1 1/4 inch coarse Kreg screws;
- (3) Hangars; and
- (2-3) Heavy-duty wall anchors*.
may not be able to find the screws at your local hardware or big box
store. By clicking on the photo of the screws, you can buy them
directly from the Kreg Tool Company.)
*The wall anchors will be necessary if/where the hangars don't line up with the stud.
The Approximate Costs to Build Decorative Wall Shelf are Below.
To build this Kreg plan from a sanded pine plywood, your costs would be
approximately $25, not including the cost of your finishing materials.
You may have to buy a full sheet of plywood, but will only use 1/4 of it this wall shelf plan.
our Hints, Tips and Recommendations!
This plan gives you an easy opportunity to try out your Kreg Rip-Cut that came with your Kreg DIY Project Kit! There are only 6 pieces of the main part of the shelf, and all of them are the same width. Half of them are also the same height.If you didn't buy the Kreg DIY Project Kit, the purchase price of $7 for this plan is well worth it, especially if this is one of your first projects.
Visit the Kreg Tool Company Website to Get Your Plans.
To go to the website for these build decorative wall shelf plans, click here,
on the Kreg Tools logo.
Then click on the
"Products" tab at the top of the page, and then go to "Education and Apparel." Your last click is on "Product Plans." There you can see all of the plans you can purchase from Kreg Tool Company, including this wall shelf plan.
After purchase, you will receive a download code via email. The
email will direct you back to the Kreg Tool Company website, where you can enter your code
to download the plan.
It's very simple! We have done it a bunch of times!
Check Out Some of the FREE Plans for the Kreg Jig!
Check Out the Free Plans Available From Kreg Tool Company!
Click on this link, or on the photo, to see the FREE Kreg Tool Company plans we have built. There is a link on that page to all the FREE Kreg Tool Company plans.
Check Out the Free Plans Available From Us!
Click on the photo, or on this link, to review the FREE Kreg Jig plans we have developed. These include a blanket chest, a hamper, an onion bin, several bookshelves, and much more.